JB wall putty is a water resistant white cement based putty which provides a strong base on concrete,/mortar walls (Internal and External) and ceilings. it is applied before painting of the wall. It fits the fine pores of the walls and ceilings, thereby providing a white, smooth and dry surface for painting. Being water resistant it provides a protective base which prevents expensive paint from flaking.'JB White Cement Wag Putty-has special added polymers and more adhesive strength which provides a strong base ensuring a longer life for the painted surface. It does not require water curing and it can even be applied on freshly plastered wall thus resulting in savings of time and cost. During repainting, the surface done up with Wall Putty-requires minimum scrubbing thus eliminating the mess of dust, which is a health hazard especially for asthmatic patients. Significant Benefits of "JB White Cement Wall Putty" JB White Wall Putty is a coarse powder specially formulated to be used as base coat It covers up undulation and can be used as a layer prior to use of 18 Wall Putty (SFP- silky finish powder) or any painting system. it Provides damp and weather resistant finish for further application of alt kind of paints (Damp resistance means resistance to water in humid air & not to physical water leakages). It gives matt finish. The powder to he mixed with water as advised for direct application on plastered surface of interiors/exteriors to get matt finish. Can be used directly on concrete rendered wall, ho!low blocks. precast walls, concrete ceiling, calcium silicate bricks. Not recommended for use on painted or other non-cementitious surfaces This is an important product to remove the roughness or undulation of any wall plaster and make it ready to apply fine JB White Wall Putty. For some repairing purpose like fitting notes or dent, coarse putty is a much required product before applying fine putty. In fact this is an associative product of JB White Wall Putty If the plaster is made up of totally coarse sand or has undulation, filling throughout the surface is required with coarse putty

Being a cementitious material it has better adhesiveness and durability with the concrete walls.

Doesn't need any kind of primer on it before application of paint/distemper thus saving time & cost.

Can be applied on both interior and exterior of walls & ceilings.

Gives a smooth, white & glossy finish to surface, which effectively reduces the consumption of subsequent Paints & gives true tone  color.

It IS in dry powder form and does not produce any kind of unpleasant smell at the time of application.

It is Eco-Friendly. it ones not contain dad, oil or toxic material.

Has anti-carbonation properties thus protects the  reinforcement bar from corrosion

Does not require any water curing after appLcauon thus saving time & Cost. It is Water resistant and can Pe appl,ed on moist surfaces.

Accepts any kind of paint or distemper application on it.

Can be applied on used surface after proper preparation.

 It prevents the growth of algae and fungus on walls.

New Surface

New surface requires preparation such as removal of dust, dirt and foreign matter. In case of cracks, voids & damages it should be repaired. Surface should be In just-wet condition, prior to putty application

Old Unpainted Surface

All loose material, organic growth, dirt, dust, etc must be removed with steel blade or wire brush. Surface should be in just-wet condition, prior to putty application

 Very Rough Surface (more than 8 mm depth)

If surface plaster was rough. Apply white cement / white cement mortar and level the surface. Cure the surface for 2 days, before starting Putty coat. Surface should be in just wet condition, prior to putty application

Mix JB coarse Putty slowly @25- 28% water by Weight to prepare paste of desired consistency Mix vigorously for 5-10 minutes for making lump free and uniform paste, as shown Product should be mixed in such quantities that it could be used within 45 minutes of its preparation Mixing could be done manually or by suitable electric mixer

Property	Wall putty	For reference	Test method
TENSILE ADHESION STRENGTH (NMM)@28 Days	> 1.0	0.8N/MM	EN1346
COMPRESSIVE STRENGTH@28 days( NVM)	>  9.0	7-12N/MM	EN196
SETTING TIME( MINUTES) INITIAL FINAL	>  100 < 500	<360 <500	EN 196
WATER ABSORPTION KG/M H1/2 COFFECIENT	< 1.0	…..	DN526147
WATER CAPPILARY (ML) ABSORPTION@24 HRS	0.8	……	KARSTEN TUBE
WATER RETENTIVITY %	>  98	>95	EN 196